Dodge Ram Van The full size Dodge Ram Van that showed that we can go and do as we please. Discuss the Dodge Ram Van here today.

ABS light cant be reset

Thread Tools
 
Search this Thread
 
  #1  
Old 07-12-2011 | 05:24 PM
rare aries's Avatar
rare aries
Thread Starter
|
Keeper of the Ks
Joined: Nov 2007
Posts: 2,782
Likes: 0
From: Ballston Spa, N.Y.
Default ABS light cant be reset

I have a customer with a 2000 3500 conversion van/ motor home with a code 63 reset switch closed. customer said when they plugged in the rear trailer to the van everything was ok. when they unplugged the harness the brake light and the abs light came on and stayed on. we scanned and found a code #63. troubleshooting the hydraulic control unit, all test show everything is working properly.I also tried to clear the code and i can not clear it. please help. Also we cannot communicate with Body Control Module.
 
  #2  
Old 07-12-2011 | 07:10 PM
eisej's Avatar
eisej
Rookie
Joined: Jul 2011
Posts: 74
Likes: 1
From: Buffalo, New York
Default

Found this in an article yesterday. Not sure if this will help but I just turned my ABS, parking brake, and warning light off by turning my ignition to on, depressed the brake, let it up, turned the ignition off, and started it up. So far hasn't come back. It always used to come back even after fixing the entire brake system including sensors and disconnecting the battery. I've got a 96 1500. Hope it works for you. Here's the article


http://www.essortment.com/bleed-brakes-car-57550.html
 
  #3  
Old 07-13-2011 | 12:20 AM
alloro's Avatar
alloro
Van & CUV Section Moderator
Joined: Nov 2006
Posts: 5,247
Likes: 98
Default

It sounds like he blew a fuse when unplugging the trailer. A blown fuse would also explain the loss of communication with the computer.
 



Quick Reply: ABS light cant be reset



All times are GMT -4. The time now is 03:14 AM.