Dodge Ram Van The full size Dodge Ram Van that showed that we can go and do as we please. Discuss the Dodge Ram Van here today.

1992 B250 Cargo van, catalytic converter and CA smog test help needed

Thread Tools
 
Search this Thread
 
Old Jun 2, 2013 | 06:16 PM
  #1  
jec444's Avatar
jec444
Thread Starter
|
New Member
Joined: Nov 2012
Posts: 11
Likes: 0
Default 1992 B250 Cargo van, catalytic converter and CA smog test help needed

Bought a used 1992 B250 cargo van in the SF Bay area. I replaced about four sensors having to do with emissions and got the smog test and failed.
Guy says that I have the wrong catalytic converter on it and that at 15mph and 25mph it is putting out roughly 4 times the emissions needed to pass!
A new CA catalytic converter costs about $200 and I'm not sure if the emissions would drop to acceptable levels even with the correct converter.
Does anyone have any experience with catalytic converters and CA smog?
Wondering if I should invest more $$ in it or just sell it for parts.
Thanks
 
Reply
Old Jun 2, 2013 | 06:44 PM
  #2  
alloro's Avatar
alloro
Van & CUV Section Moderator
15 Year Member
Liked
Loved
Community Favorite
Joined: Nov 2006
Posts: 5,379
Likes: 116
Default

Post the test results so we can review the data, especially the CO and HC levels.
 
Reply
Old Jun 2, 2013 | 07:01 PM
  #3  
jec444's Avatar
jec444
Thread Starter
|
New Member
Joined: Nov 2012
Posts: 11
Likes: 0
Default sure thing

sure thing:

15mph HC=838 (122 max), 0.67=CO (.72 max)
25mph HC= 841 (102 max), 0.74=CO (.64 max)
 
Reply
Old Jun 2, 2013 | 10:13 PM
  #4  
alloro's Avatar
alloro
Van & CUV Section Moderator
15 Year Member
Liked
Loved
Community Favorite
Joined: Nov 2006
Posts: 5,379
Likes: 116
Default

It's not your cat, you have burnt valves. A bad cat will give you high HC reading but it will not give you a high CO reading. The high CO reading is the result of unburnt fuel getting into the exhaust. Also to note is how the CO goes up with the increase in MPH. As engine speed increases the timing advances and the CO should go down, not up. Again this is an indication of even more unburnt fuel getting into the exhaust.
 

Last edited by alloro; Jun 3, 2013 at 10:56 AM.
Reply
Old Jun 3, 2013 | 10:45 AM
  #5  
jec444's Avatar
jec444
Thread Starter
|
New Member
Joined: Nov 2012
Posts: 11
Likes: 0
Default

wow, great info. MANY thanks!
This is way over my expertise! I will sell for parts or repairs.
Thanks again!
 
Reply




All times are GMT -4. The time now is 05:37 AM.