Dodge Ram Van The full size Dodge Ram Van that showed that we can go and do as we please. Discuss the Dodge Ram Van here today.

HELP! 1997 B2500 Van no power to fuel pump

Thread Tools
 
Search this Thread
 
Old Jul 29, 2017 | 03:27 PM
  #1  
johngerding's Avatar
johngerding
Thread Starter
|
Registered User
Joined: Jul 2017
Posts: 8
Likes: 0
Default HELP! 1997 B2500 Van no power to fuel pump

Ok so van was running great, parked. went to start it back up and it cranked but will not start, figured out that it was not getting fuel, removed fuel tank and installed new fuel pump, still nothing, tested power to fuses and relays all have power going to them, replaced crankshaft sensor, no change. I am stuck in big way, if i dont have this van running by monday Im gonna lose $3000 in work. somebody please tell me something good... I have been trouble shooting for 2 days already.
 
Reply
Old Jul 29, 2017 | 03:47 PM
  #2  
jkeaton's Avatar
jkeaton
DF Admin
15 Year Member
Photogenic
Photoriffic
Liked
Joined: Apr 2010
Posts: 28,211
Likes: 366
From: Winston Salem, NC
Default

Fuel filter?
 
Reply
Old Jul 29, 2017 | 05:10 PM
  #3  
tjkoko's Avatar
tjkoko
Professional
Joined: Jul 2017
Posts: 146
Likes: 0
Default

Have you bled the fuel system??? Have you checked for spark at the coil and at the plugs???
 
Reply
Old Jul 29, 2017 | 05:26 PM
  #4  
johngerding's Avatar
johngerding
Thread Starter
|
Registered User
Joined: Jul 2017
Posts: 8
Likes: 0
Default

I forgot to say that the van will start and run with starting fluid in the throttle body, so yes it has spark, There is 100% no power going to the fuel pump, the fuel filter is built into the fuel pump so it has nothing to do with that either. There is just no power to the fuel pump, Im down to either a shorted wire or bad ecm. I dont know where else to look.
 
Reply
Old Jul 29, 2017 | 06:31 PM
  #5  
johngerding's Avatar
johngerding
Thread Starter
|
Registered User
Joined: Jul 2017
Posts: 8
Likes: 0
Default

So I got a better test light and I have confirmed there is a hot wire at the fuel pump wiring harness, but the pump does not engage like it should.
 
Reply
Old Jul 29, 2017 | 10:46 PM
  #6  
tjkoko's Avatar
tjkoko
Professional
Joined: Jul 2017
Posts: 146
Likes: 0
Default

Originally Posted by johngerding
So I got a better test light and I have confirmed there is a hot wire at the fuel pump wiring harness, but the pump does not engage like it should.
What do you mean by "...engage like it should..."????????

Engage what?
 
Reply
Old Jul 29, 2017 | 10:53 PM
  #7  
johngerding's Avatar
johngerding
Thread Starter
|
Registered User
Joined: Jul 2017
Posts: 8
Likes: 0
Default

Originally Posted by tjkoko
What do you mean by "...engage like it should..."????????

Engage what?
When you turn on the ignition the pump is supposed to spin for 2 to 3 seconds then turn off until you start the van right? but it never does engage.
 
Reply
Old Jul 29, 2017 | 11:09 PM
  #8  
SteveR's Avatar
SteveR
Captain
Joined: Jan 2009
Posts: 547
Likes: 1
From: Ontario
Default

On my 1991 there are a number of grounds attached to the floor/frame on the passenger side just ahead of the tank. I would have a look at them and the rest of the grounds on the van. You could also try to test the old pump across the battery terminals to see if it works without the van harness involved. The pump should work if you have power and ground connected. The tank is plastic so you need to make sure you have a good ground through the wiring.
Steve
 
Reply
Old Jul 29, 2017 | 11:35 PM
  #9  
tjkoko's Avatar
tjkoko
Professional
Joined: Jul 2017
Posts: 146
Likes: 0
Default

Originally Posted by johngerding
When you turn on the ignition the pump is supposed to spin for 2 to 3 seconds then turn off until you start the van right? but it never does engage.
You mean that it doesn't spin for 2-3 seconds upon ignition turn on????
 
Reply
Old Jul 29, 2017 | 11:56 PM
  #10  
johngerding's Avatar
johngerding
Thread Starter
|
Registered User
Joined: Jul 2017
Posts: 8
Likes: 0
Default

Originally Posted by tjkoko
You mean that it doesn't spin for 2-3 seconds upon ignition turn on????
That is correct yes.
there is power to the pump, I have also jumped the asd relay and the fuel flow relay and the pump still will not spin for that couple seconds on turning the key. the tank is now empty, does it have a safety that prevents the pump from turning on if the tank is empty?
 
Reply



All times are GMT -4. The time now is 07:56 AM.