Dodge Ram Van The full size Dodge Ram Van that showed that we can go and do as we please. Discuss the Dodge Ram Van here today.

Any repair shops in SW Washington? 1999 B3500

Thread Tools
 
Search this Thread
 
  #1  
Old 05-31-2021, 12:39 PM
Chocobo's Avatar
Chocobo
Chocobo is offline
Registered User
Thread Starter
Join Date: May 2021
Posts: 1
Received 0 Likes on 0 Posts
Default Any repair shops in SW Washington? 1999 B3500

I have a “new to me” 1999 RoadTrek RV B3500 with no forward gears. It’s at a shop in a small town but they really don’t want to deal with it. I only have reverse gear, so it could be a few different things to check. Location is 23 miles NE of Vancouver Washington.
it’s been there a week and a half without being looked at. I’m staying at my sisters place, since I still need to drive my prize home to Montana
I can tow it to Vancouver or Battle Ground to another shop, if someone has recommendations. Thank You!!
 
  #2  
Old 05-31-2021, 03:15 PM
HeyYou's Avatar
HeyYou
HeyYou is online now
Administrator
Dodge Forum Administrator
Join Date: Apr 2010
Location: Clayton MI
Posts: 82,509
Likes: 0
Received 3,387 Likes on 3,127 Posts
Default

Unplug the 8 pin connector on the drivers side of the trans, about halfway back. It plugs straight down into the top of the bumpout for the valve body. See if it will go into gear. Bear in mind, it won't have ANY automatic function, nor will it have TCC, or O/D... You will have to shift it manually. So, start in first, and up/down shift as appropriate. If it works, then it's just the electronics. If it doesn't, it's rebuild time.
 
The following users liked this post:
Chocobo (05-31-2021)
  #3  
Old 05-31-2021, 09:58 PM
1990B150318's Avatar
1990B150318
1990B150318 is offline
Professional
Join Date: May 2021
Location: mountainous
Posts: 121
Received 6 Likes on 6 Posts
Default

Originally Posted by HeyYou
Unplug the 8 pin connector on the drivers side of the trans, about halfway back. It plugs straight down into the top of the bumpout for the valve body. See if it will go into gear. Bear in mind, it won't have ANY automatic function, nor will it have TCC, or O/D... You will have to shift it manually. So, start in first, and up/down shift as appropriate. If it works, then it's just the electronics. If it doesn't, it's rebuild time.
Wow man you always have a solution!
 
  #4  
Old 06-04-2021, 01:12 AM
Gigantor's Avatar
Gigantor
Gigantor is offline
Amateur
Join Date: May 2021
Posts: 25
Received 3 Likes on 2 Posts
Default

What is the current situation Chocobo? Did you do what HeyYou suggested? You can pretend you have a 3 on the tree manual. I used to love those.
 



Quick Reply: Any repair shops in SW Washington? 1999 B3500



All times are GMT -4. The time now is 11:07 AM.