Back up switch
Thread Starter
|
Registered User
Joined: Jul 2021
Posts: 1
Likes: 0
Back up switch
I have a 1996 B3500 van with a 318, I have installed a back up camera and spliced into the back up lamp for the switch to activate the back up camera......sometimes I get the full voltage and the camera works, other times I get 9 volts, which isn’t enough to toggle the switch in the back up camera.....now what gets me is it’s either full voltage or 9 volts, it seems to me if it was a switch problem the voltage would vary and not be a consistent 9 volts....any ideas
