Dodge Ram Van The full size Dodge Ram Van that showed that we can go and do as we please. Discuss the Dodge Ram Van here today.

1999 Dodge Ram van no bu5 wont start for months

Old Oct 21, 2021 | 10:34 AM
  #1  
Sulaiimaan's Avatar
Sulaiimaan
Thread Starter
|
Registered User
Joined: Oct 2021
Posts: 9
Likes: 0
Default 1999 Dodge Ram van no bu5 wont start for months

One day went outside started van it ran and shut off, been trying to fix it replaced pcm it’s programmed in, I scanned it code p1389 came up I think it’s the crankshaft sensor any advice?
 
Reply
Old Oct 21, 2021 | 10:38 AM
  #2  
alloro's Avatar
alloro
Van & CUV Section Moderator
15 Year Member
Liked
Loved
Community Favorite
Joined: Nov 2006
Posts: 5,379
Likes: 116
Default

Dodge doesn't have a crank sensor code.

Code P1389...
https://www.engine-codes.com/p1389.html
 
Reply
Old Oct 21, 2021 | 11:19 AM
  #3  
Sulaiimaan's Avatar
Sulaiimaan
Thread Starter
|
Registered User
Joined: Oct 2021
Posts: 9
Likes: 0
Default

Originally Posted by alloro
Dodge doesn't have a crank sensor code.

Code P1389...
https://www.engine-codes.com/p1389.html
I checked with a code scanner it came up. Also does that mean the ASD relay is bad?
 
Reply
Old Oct 22, 2021 | 12:47 AM
  #4  
Gigantor's Avatar
Gigantor
Amateur
Joined: May 2021
Posts: 25
Likes: 3
Default

Sulaiimaan did you read his link? It read...

P1389 code possible causes

  • Faulty Auto Shutdown (ASD) Relay
  • Auto Shutdown (ASD) Relay harness is open or shorted
  • Auto Shutdown (ASD) Relay circuit poor electrical connection
  • Faulty Powertrain Control Module (PCM)
It has suggestions on what to do. Read it again.
 
Reply
Old Oct 27, 2021 | 08:05 PM
  #5  
Sulaiimaan's Avatar
Sulaiimaan
Thread Starter
|
Registered User
Joined: Oct 2021
Posts: 9
Likes: 0
Default

Originally Posted by Gigantor
Sulaiimaan did you read his link? It read...

P1389 code possible causes

  • Faulty Auto Shutdown (ASD) Relay
  • Auto Shutdown (ASD) Relay harness is open or shorted
  • Auto Shutdown (ASD) Relay circuit poor electrical connection
  • Faulty Powertrain Control Module (PCM)
It has suggestions on what to do. Read it again.
yes I got it running today I changed the crankshaft position sensor it’s running but rough and shuts down after a little I still have the code p1389 and now I have a code p340 and p1391
 
Reply


Thread Tools
Search this Thread

All times are GMT -4. The time now is 02:42 PM.