[&:]Has anyone out there in Ramland replaced their rear slider? Mine was destroyed while parked on the friendly streets of NOLA. How? Dunno...but it rains a LOT here, so... Anyway, I'd much 'preciate any tips or pointers. One specific thing that comes to mind, though...will I have to remove the head liner and rear seat to do this? I've got a quad cab, so the rear seat looks like an issue???

 

i haven't done it with a dodge, but I have with a toyota it's a two person job and you'll need some rope. But it isn't that difficult

 

i have seen in a trukin magazine where u can get a lexxan back glass with ur license plate in it, i think lexxan is like a thick plexiglass virtually industructible, take that downtown and see somebody smash it

 

Ram44maR,
You should not have to remove the seat to do this job. Big hint take an old broom handle or similar sized dowel and make end handles on the ends of the rope for installing the new window. I also suggest that you use duct tape to with some give on the top to make sure the window does not fall out. I used the bicycle tire changing wedges to remove the old window in my Nissan a while back and useing a the methods above i was able to safely install the window. But the two man rule is always safer. Let us know if you have any further questions.