can anyone please tell me what the torque spec on the intake manifold bolts and the belly pan bolts is for a 99 ram 1500 360ci? I can't find this info anywhere. Thanks Jack

 

Step 1 - Tighten bolts 1 through 4, in sequence, to 8 N·m (72 in. lbs.) torque. Tighten in alternating steps 1.4 N·m (12 in. lbs.) torque at a time.
Step 2 - Tighten bolts 5 through 12, in sequence, to 8 N·m (72 in. lbs.) torque.
Step 3 - Check that all bolts are tighten to 8 N·m (72 in. lbs.) torque.
Step 4 - Tighten all bolts, in sequence, to 16 N·m (12 ft. lbs.) torque.
Step 5 - Check that all bolts are tighten to 16 N·m (12 ft. lbs.) torque