not shifting
Champion
Joined: Feb 2004
Posts: 3,640
Likes: 0
From: United States
RE: not shifting
Then your car is in "limp mode." It could either be the TCU, or something amiss with the transmission its self.
When you send you TCU off for rebuild, I'd recommend getting the ECU checked out at same time, as well as the ECS computer (if equipped). All three units have the same capacitors that start to leak with age.
When you send you TCU off for rebuild, I'd recommend getting the ECU checked out at same time, as well as the ECS computer (if equipped). All three units have the same capacitors that start to leak with age.
Joined: Jun 2007
Posts: 2
Likes: 0
From: Canada
RE: not shifting
Hi Daisy!! I was wondering when they put your car on the diagnostic machine to see what was wrong was it able to read what was wrong with the transmission!! Or did it say can't read(no data)?? Nobody seems to be able to get a reading on my transmission!! Thanks!!
Champion
Joined: Feb 2004
Posts: 3,640
Likes: 0
From: United States
RE: not shifting
Here is the procedure for pulling codes from your ECU. http://www.stealth316.com/2-diagcodes91-93.htm
The only one referencing the TCU is code #19.
The only one referencing the TCU is code #19.
Thread Starter
Joined: Jul 2007
Posts: 32
Likes: 0
From:
RE: not shifting
shtoopie. ididnt have my car diagnosed. the people in the forum helped with this. so be thankful that they can help. and if your car is in limp mode dont drive it anymore or your front seals might break.
