Here is a pic ot the Dropstars on my car I just got them and am waiting for the lowering kit so it looks kindove funny in the pic!! I am running some 225/35/20s for the rubber.



[IMG]local://upfiles/26240/54FF9782B3254BFBBCEA5471300CDE26.jpg[/IMG]

 

Oh and here is a Pic of the Camaro I knows its a Chevy but its pretty Bad ***

 

thats some big meat under the back end..whats it run?

 

The car runs low 10s on the bottle and high 10s low 11s on motor It'sd a fun little toy!!

Dan

 

nice! what kind of cage are you running and whats done?

 

I have a Wolf weld in Chromoly rollcage (8 point) not in the pic though as I have got kick out of our local track about 5 times then I decided to just put one in! As far as Mods to the car I have a Full Drag style susp. let me know if you want me to go into detail because there is a lot of parts!! The Engine mods are the Basic Boltons plus a Set of stage 2 AFR heads A TSP .237/.242 dur and .603/.609 lift Camshaft, full fuel system, The ar has been put on a diet, raceweight of 3150 with me in the car, I have a Strange 12bolt with 4.30 gears, 3.5" alum. driveshaft TNT Twister force 2 nitrous kit running the 150 jets, and LOTS of tuning not only to the engine but also the susp. I lauch at 5,000 rpm on the 150 shot and almost dead hook, she just needs a little more tweeking to find the perfect sweet spot. best run to date on the bottle is 10.21 @ 134.6 with a 1.37 60ft And also this is a stick car I love to row through the gears I had G-Force build my tranny and run a Spec stage 5 clutch. That pretty much is a quick verson of what is done

Dan

 

damn amazing LS1s...[:@]



that is pretty impressive...that seems pretty light, what did you have to remove to get to that? and wouldnt it be a bit faster with an auto trans (and consistent)? ive seen a few LS1 guys go from the mtx to atx and cut quite a bit of time...

 

NICE LOOKING CARS MA MAN, DIDNT THINK 20'S WOULD FIT UNDER THE STRATUS, I HAVE AN 01 R/T AND THE STOCK 17'S WITH THE STOCK RUBBER IS CUTTING IT CLOSE, SHARP MAN, ALSO SWEET *** CAMARO, NICE AND CLEAN. SHARP

 

i am also impressed how cleanly they fit. is there any reduction in the turning clearance?

 

Sweet, another guy who owns a Stratus and a Camaro. I've got a 95 Z. Unfortunately it only runs low 13's but it's still fun.
Here's a pic.