Lower class club...
#683
well guys, buddy of mine talked me into getting started on this beast
my fiberglass dash, im gonna try to retain 4 factory components,
1, the frame
2, the gauges
3, the lower plastics
4, the pass.side airbag, screw TVs
i will be going with a double din touchscreen HU that will be mounted in the console
but, im going to look into custom gauges, so that everything from the tach to the PSI gauges will match
my fiberglass dash, im gonna try to retain 4 factory components,
1, the frame
2, the gauges
3, the lower plastics
4, the pass.side airbag, screw TVs
i will be going with a double din touchscreen HU that will be mounted in the console
but, im going to look into custom gauges, so that everything from the tach to the PSI gauges will match
#685
hey ajax save the favor for something special or more challenging....heres a link...
http://cgi.ebay.com/ebaymotors/Smoke...Q5fAccessories
that should be plenty i had enough left over to do another taillight but i used it when i painted my headlight housing black...to cover the ambers so they are still transparent im sure if you check ebay and type in smoked vinyl you can find more but these guys stuff is great im sure theres darker now too....wish i was just a lil darker....when i replace it im prolly gonna go darker...i feel this is the way to go just in case somebody nicks or scratches its not back in the paint booth for expensive coat just peel and re apply
http://cgi.ebay.com/ebaymotors/Smoke...Q5fAccessories
that should be plenty i had enough left over to do another taillight but i used it when i painted my headlight housing black...to cover the ambers so they are still transparent im sure if you check ebay and type in smoked vinyl you can find more but these guys stuff is great im sure theres darker now too....wish i was just a lil darker....when i replace it im prolly gonna go darker...i feel this is the way to go just in case somebody nicks or scratches its not back in the paint booth for expensive coat just peel and re apply
#686
#688
i was thinkin if i couldnt find any... i would just get a set with the leds, take the housings apart, bondo all the holes up then paint 'em. only problem is getting them to look like they came that way. worst case scenario i just wont hook up the leds, but this is what im shootin for right now... http://cgi.ebay.com/ebaymotors/02-03...Q5fAccessories
#689
#690