General Tech Good at troubleshooting? Have a non specific issue? Discuss general tech topics here.

Please Help!!!!

Old Oct 26, 2004 | 11:49 PM
  #1  
JCswm's Avatar
JCswm
Thread Starter
|
Veteran
Joined: May 2004
Posts: 363
Likes: 1
From: Florida
Default Please Help!!!!

My Father .... In Ohio needs an exhaust manifold for his '97 Grand Cherokee 4.0
Who makes a CHEAP header or Manifold that will last a few years or more?????
If any members in the Columbus, Ohio area would like to tackle such a project It would save me a $300.00 plane ticket & some lost wages. The Cat will also need Gutted so a shop is out!!!
Here's a chance to make some cash on the side....... Any takers?????











Hi Amanda!!! You Hottie You!!!!
 
Reply
Old Oct 31, 2004 | 12:54 AM
  #2  
JCswm's Avatar
JCswm
Thread Starter
|
Veteran
Joined: May 2004
Posts: 363
Likes: 1
From: Florida
Default RE: Please Help!!!!

Bump TTT
 
Reply
Old Nov 30, 2004 | 03:45 AM
  #3  
brian_a_mcmillen's Avatar
brian_a_mcmillen
Amateur
Joined: Nov 2004
Posts: 38
Likes: 0
From:
Default RE: Please Help!!!!

Hey.....I recently purchased an exhaust header system from of all places...NAPA. I believe it was in the neighborhood of $200 and fairly simple to install. I put this one on a Wrangler (tight quarters you know) and it took only a couple of hours. Mare sure you buy exhaust bolts/stids just in case. This kit also came with both gaskets. The cracked exhaust header is a very common problem on the 4.0's.

Good Luck!
 
Reply
Old Nov 30, 2004 | 06:04 AM
  #4  
JCswm's Avatar
JCswm
Thread Starter
|
Veteran
Joined: May 2004
Posts: 363
Likes: 1
From: Florida
Default RE: Please Help!!!!

It is a VERY common problem.... more often than not caused by the manifold bolts being overtightened
 
Reply


Thread Tools
Search this Thread

All times are GMT -4. The time now is 11:07 AM.