alternator just went out on my 02 dodge ram, was gonna see if anyone had step-by-step instructions or any tips on replacing this...thanks a lot

 

REMOVAL
3.7L / 4.7L
WARNING: DISCONNECT NEGATIVE CABLE FROM BATTERY BEFORE REMOVING BATTERY OUTPUT WIRE (B+ WIRE) FROM GENERATOR. FAILURE TO DO SO CAN RESULT IN INJURY OR DAMAGE TO ELECTRICAL SYSTEM.
[ol][*]Disconnect negative battery cable at battery.[*]Remove generator drive belt. Refer to 7, Cooling System for procedure.[*]Unsnap plastic insulator cap from B+ output terminal (GENERATOR CONNECTORS - 3.7L / 4.7L).[*]Remove B+ terminal mounting nut at rear of generator (GENERATOR CONNECTORS - 3.7L / 4.7L). Disconnect terminal from generator.[*]Disconnect field wire connector at rear of generator (GENERATOR CONNECTORS - 3.7L / 4.7L) by pushing on connector tab.[*]Remove 1 rear vertical generator mounting bolt (REMOVE / INSTALL GENERATOR - 3.7L / 4.7L).[*]Remove 2 front horizontal generator mounting bolts (REMOVE / INSTALL GENERATOR - 3.7L / 4.7L).[*]Remove generator from vehicle.[/ol]