General Tech Good at troubleshooting? Have a non specific issue? Discuss general tech topics here.

Oil grade question

Thread Tools
 
Search this Thread
 
Old Jan 30, 2008 | 09:52 PM
  #1  
lonestar1500's Avatar
lonestar1500
Thread Starter
Joined: Jan 2008
Posts: 1
Likes: 0
Default Oil grade question

I have a 2004 1500 truck with a 4.7 liter V-8 engine and know that the oil filler cap says to use 5W-30 oil but would it make a difference if I used 10W-40 oil instead. Thanks in advance for the help?
 
Reply
Old Jan 30, 2008 | 10:54 PM
  #2  
moe7404's Avatar
moe7404
Record Breaker
Joined: Jul 2007
Posts: 2,040
Likes: 1
From:
Default RE: Oil grade question


moe in wichita ks

the most important thing about oil is to have lots of zinc in the oil. i have done some searching on the internet on oil, filters, additives. i like to have oil as thick as i can and it still start in cold. so here is what i use, 2001 dak v6. valoline premium blue 15w-40 oil. purolator pl14670 pure one filter, use only a pure one filter that is shown by the p in the part no. then you need to go to zddplus.com site and get some zinc from them. my truck starts ok in the winter, but we normaly dont get below 0 f.
i did have trouble with 20-50 not wanting to turn over in the winter.
 
Reply
Old Feb 5, 2008 | 04:09 AM
  #3  
renton's Avatar
renton
Joined: Feb 2008
Posts: 2
Likes: 0
Default RE: Oil grade question

try this site http://theserviceadvisor.com/part/fu...udi/index.html ....,also try Buick Terraza Oil Filter
 
Reply




All times are GMT -4. The time now is 10:16 AM.