I was looking at this one for my car, but on a couple of the sites that I found, there is an optional upper tube to connect to it. Do I really need it or can I put the blow off valve on without it????

 

I think your talking about the tube that sends what blows off back into your system "recirculation" which elimates the sound that it makes. so if you want the upgraded bov but you still want to keep it quiet then get it if you want the noise then doint... i have a type rs with out the recirculation tube and love it.

if this isnt what your talking about please refrase your question.

 

Gump... I was looking to get an RS, hoe easy is it to install? and what other parts do I need to install it?

 

i think she's talking about the upp. and yes, you do need that. you need the bov, a flange, and a pipe to install. it's a very simple install, shouldn't take more than about a half hour including putting on the cold side pipe. it's a nice sounding bov, i've had it for about six months now.

 

ahh got ya... thanks for clearing that up psi.. i didnt even think of cold side lol. and the install should be that long but ive ranted enough about a certain company that made mine about 3 times longer...

and you need a block off plate for your old surge valve.

 

What do you guys think of the turbonetics BOV and pipe... (I have a link to it here)

http://www.modernperformance.com/dcx...surepipe.shtml

 

Also would this be a decent pipe to use to mount a BOV?

http://www.modernperformance.com/dcx...surepipe.shtml

thanks for listening to all my noob questions!

 

Ok, so that makes more sense.

I do want the noise, what is EVERYTHING I need ??????

 

whats the loudest most disgusting sounding blow off valve u can buy? Cuz thats what i want... As long as everyone knows my car has a turbo im happy... lemme know.

 

you will need: a pressure pipe/cold side pipe with the flange of the bov you get put on the pipe, block off plate, bov of choice.