Pic Post! Introduce you and your SRT
I'm Paul From Troy Michigan. I have a 2003 with 28k on it.
My Mods are
Mopar Stage 2 with Toys
Ported -TB,Intake Manifold, Turbo and Exhaust Manifold
Poor man sways,
ES endlinks,
Ipp Coilovers
MPx 3in No Cat Exhaust
Mopar Short Shifter
Bdj CAI
MSD wires
Blitz Id3 Boost Controller
AEM Wideband
Carbon Fiber license plate cover and C pillars
Full body Graphics
Mopar Tuner Tails
DCR Clutch
LSD
Front Tower Brace
Rev it up Traction bars(not installed yet)
ATP Up pipe with HKS BOV
Maxx Fab 3in O2 housing
Clear Corner Lenses
Ventgaurds
and i think that is it-probably forgetting something
[IMG]local://upfiles/46980/ABD02E354B9542849CBEC8401DDDD97A.jpg[/IMG]
[IMG]local://upfiles/46980/CB3DB28D9D674DFC9FA7A097B171D0D1.jpg[/IMG]
[IMG]local://upfiles/46980/A9D099C0430A4B8DAD26335EC8DB7E14.jpg[/IMG]
My Mods are
Mopar Stage 2 with Toys
Ported -TB,Intake Manifold, Turbo and Exhaust Manifold
Poor man sways,
ES endlinks,
Ipp Coilovers
MPx 3in No Cat Exhaust
Mopar Short Shifter
Bdj CAI
MSD wires
Blitz Id3 Boost Controller
AEM Wideband
Carbon Fiber license plate cover and C pillars
Full body Graphics
Mopar Tuner Tails
DCR Clutch
LSD
Front Tower Brace
Rev it up Traction bars(not installed yet)
ATP Up pipe with HKS BOV
Maxx Fab 3in O2 housing
Clear Corner Lenses
Ventgaurds
and i think that is it-probably forgetting something
[IMG]local://upfiles/46980/ABD02E354B9542849CBEC8401DDDD97A.jpg[/IMG]
[IMG]local://upfiles/46980/CB3DB28D9D674DFC9FA7A097B171D0D1.jpg[/IMG]
[IMG]local://upfiles/46980/A9D099C0430A4B8DAD26335EC8DB7E14.jpg[/IMG]
Hi...My Names is Jeremy. Drive a 03. Bought used in aug 04 with 1,336 miles on it (now with 17k) . Went through a lot of changes in the past couple years.... Holding off until i get the loan paid off for S3. (10g's to go)
Here's my baby.
Mods are..... If i don't forget.
Performance:
Stage 1 / Goldline Springs / 3" turbo back exhaust / APG WGA / MOPAR BOV / MOPAR STS + Booger Bushings / MSD Tack Driver and light / Aeroforce Scan Gauge / Cheap Front Strut Bar / $20 Oil C.C. / K&N Air Filter
Visual:
Full Tint / Shorty Anti / Black Commemorative Stripes / Black Eye Lids / Blue LED Dash Lights / Yellow Fog / Powder Coated Valve Cover & Air Manafold / MP3-CD Player + XM Radio / Shift **** / LED Tail Lights / Gas Struts for the hood (no pic )
Fuel Rail Cover was signed by the workers and engineers at the SRT Track Experience.








Here's my baby.
Mods are..... If i don't forget.
Performance:
Stage 1 / Goldline Springs / 3" turbo back exhaust / APG WGA / MOPAR BOV / MOPAR STS + Booger Bushings / MSD Tack Driver and light / Aeroforce Scan Gauge / Cheap Front Strut Bar / $20 Oil C.C. / K&N Air Filter
Visual:
Full Tint / Shorty Anti / Black Commemorative Stripes / Black Eye Lids / Blue LED Dash Lights / Yellow Fog / Powder Coated Valve Cover & Air Manafold / MP3-CD Player + XM Radio / Shift **** / LED Tail Lights / Gas Struts for the hood (no pic )
Fuel Rail Cover was signed by the workers and engineers at the SRT Track Experience.







hi my name is john. i drive a 05 srt4.
mods-
stage 3 fuel rail
stage 3 fuel regulator
stage 2 injectors
stage 1 pcm
3" side exit exhaust
3" mpx o2 housing
qw intercooler
tein springs
safc controller
agp wga(20psi)
255 walbro fuel pump
3" needwings down pipe
www.myspace.com/sloboysrt4
mods-
stage 3 fuel rail
stage 3 fuel regulator
stage 2 injectors
stage 1 pcm
3" side exit exhaust
3" mpx o2 housing
qw intercooler
tein springs
safc controller
agp wga(20psi)
255 walbro fuel pump
3" needwings down pipe
www.myspace.com/sloboysrt4
PARTS FOR SALE:
im in a financial situation and i need money, so it looks like i might have to put my 486whp baby back to stock...or half way stock....anyway, im selling some of the parts, IN EXCHANGE FOR YOUR STOCK/AFTERMARKET PARTS. this is important because i don't have my stock parts anymore.....
AMONGST A LONG LIST OF MODS, I HAVE:
*AGP HP-61 BALL BEARING TURBO AND MANIFOLD (2,000 miles on it)
*AEM STAND-ALONE ENGINE MANAGMENT SYSTEM <----NOT a typo
*1008cc INJECTORS
*5 BAR MAP
*AEM WIDEBAND SENSOR
*-6 STEEL BRAIDED FUEL LINES (i dont know how easy these would be to exchange, but ill find out)
*FUEL PRESSURE REGULATOR
*MOPAR SHORT SHIFTER
*CLUTCHMASTERS STAGE 4 CLUTCH- 6-PUCK. (NOT SURE HOW EASY THAT WOULD BE TO EXCHANGE, BUT MAYBE POSSIBLE.) Clutch has 1,000 miles on it!!!!!!!
*AGP FRONT MOUNT INTERCOOLER- THIS FMIC HAS A HOLE IN IT, THE WELDING POPPED ON THE FRONT RIGHT SIDE DUE TO OVERBOOST. I THINK THAT YOU SHOULD BE ABLE TO JUST WELD IT BACK TOGETHER...BUT I CAN FIND OUT ABOUT THAT TOO.
*TRANSMISSION WITH LIMITED SLIP DIFFERENTIAL (IN EXCHANGE FOR YOUR TRANNY, OF COURSE)
*17 INCH RAY'S RACING WHEELS. ("G-GAMES" MODEL, IN GUNMETAL WITH POLISHED LIP) WITH TOYO PROXES, 90% NEW. I THINK THEY ARE 225/35/17...MAYBE BIGGER....
*STAGE 4 MOPAR COILOVERS (I DONT THINK I WOULD NEED YOUR STOCK SPRINGS, I THINK I HAVE THE STOCKS IN THE GARAGE SOMEWHERE)
*TWO STOCK 17 INCH SRT-4 WHEELS WITH NEW (90%) TIRES.
*CARBON FIBER HOOD WITH THREE SCOOPS, PAINTED SILVER ON THE SIDES, AND CARBON FIBER IN THE MIDDLE.
call me to make an offer on any, or all parts.
ok...i could keep going, but i think you get the point....i live in miami, fl, and i will ship, on whatever parts that may apply to. like i said before, i have almost no stock parts left, so THIS IS IN EXHANGE FOR YOUR STOCK PARTS.
please dont waste my time with some stupid offer, like 100 bucks for my turbo! most of these parts are very new...some are brand new, and im looking for top dollar for them.
i do not come on here much, so your best bet it to call me with an offer.
my cell phone number is (305)-720-8806.
call me anytime, but i work, so if i dont answer, IM BUSY!
thanks
greg
im in a financial situation and i need money, so it looks like i might have to put my 486whp baby back to stock...or half way stock....anyway, im selling some of the parts, IN EXCHANGE FOR YOUR STOCK/AFTERMARKET PARTS. this is important because i don't have my stock parts anymore.....
AMONGST A LONG LIST OF MODS, I HAVE:
*AGP HP-61 BALL BEARING TURBO AND MANIFOLD (2,000 miles on it)
*AEM STAND-ALONE ENGINE MANAGMENT SYSTEM <----NOT a typo
*1008cc INJECTORS
*5 BAR MAP
*AEM WIDEBAND SENSOR
*-6 STEEL BRAIDED FUEL LINES (i dont know how easy these would be to exchange, but ill find out)
*FUEL PRESSURE REGULATOR
*MOPAR SHORT SHIFTER
*CLUTCHMASTERS STAGE 4 CLUTCH- 6-PUCK. (NOT SURE HOW EASY THAT WOULD BE TO EXCHANGE, BUT MAYBE POSSIBLE.) Clutch has 1,000 miles on it!!!!!!!
*AGP FRONT MOUNT INTERCOOLER- THIS FMIC HAS A HOLE IN IT, THE WELDING POPPED ON THE FRONT RIGHT SIDE DUE TO OVERBOOST. I THINK THAT YOU SHOULD BE ABLE TO JUST WELD IT BACK TOGETHER...BUT I CAN FIND OUT ABOUT THAT TOO.
*TRANSMISSION WITH LIMITED SLIP DIFFERENTIAL (IN EXCHANGE FOR YOUR TRANNY, OF COURSE)
*17 INCH RAY'S RACING WHEELS. ("G-GAMES" MODEL, IN GUNMETAL WITH POLISHED LIP) WITH TOYO PROXES, 90% NEW. I THINK THEY ARE 225/35/17...MAYBE BIGGER....
*STAGE 4 MOPAR COILOVERS (I DONT THINK I WOULD NEED YOUR STOCK SPRINGS, I THINK I HAVE THE STOCKS IN THE GARAGE SOMEWHERE)
*TWO STOCK 17 INCH SRT-4 WHEELS WITH NEW (90%) TIRES.
*CARBON FIBER HOOD WITH THREE SCOOPS, PAINTED SILVER ON THE SIDES, AND CARBON FIBER IN THE MIDDLE.
call me to make an offer on any, or all parts.
ok...i could keep going, but i think you get the point....i live in miami, fl, and i will ship, on whatever parts that may apply to. like i said before, i have almost no stock parts left, so THIS IS IN EXHANGE FOR YOUR STOCK PARTS.
please dont waste my time with some stupid offer, like 100 bucks for my turbo! most of these parts are very new...some are brand new, and im looking for top dollar for them.
i do not come on here much, so your best bet it to call me with an offer.
my cell phone number is (305)-720-8806.
call me anytime, but i work, so if i dont answer, IM BUSY!
thanks
greg
Hi, my name is Krisjtán and I'm from Iceland. Just bought a 2005 Dodge Neon SRT-4 2 weeks ago and it had 8400miles on it. Now it has 10.400miles. here are some pictures of my car...








My plan is to get:
Turbotimer (Just installed one)
Lowering Springs (Already ordered)
Blow off valve
Cold Air Intake
Altezza Aftermarket CLK Taillights
Maybe some other rims
Walbro 255lph
Maybe later on a good Exhaust system, a stage 2 or 3 w/turbotoys
and so on....








My plan is to get:
Turbotimer (Just installed one)
Lowering Springs (Already ordered)
Blow off valve
Cold Air Intake
Altezza Aftermarket CLK Taillights
Maybe some other rims
Walbro 255lph
Maybe later on a good Exhaust system, a stage 2 or 3 w/turbotoys
and so on....
Hi my name is Rick and I live in Crap Town Highlands, NC Nothing to really do here but nice mountain roads to drive on. I have white 05 srt-4 with 17k miles on it putting out about 280hp. I use this car as my daily driver to work about 2 miles away lol and also drive to the next town over (20 miles or so each way) about 2 times a week. Below is a list of mods that i have done so far.
--------------------------------------
Mopar Intake
Mopar Exhaust / Bolar (No Cat)
Mopar BOV
Mopar Stage 1 PCM
Mopar Stage 1 Susp.
Mopar Front & Rear Strut Tower Bars
MSD Ignition & 8.5MM Wires
3" Downpipe
--------------------------------------------------
Im still Thinking about going stage 3 in about a year, but not sure yet.
Here are a few pictures i have
----------------------------------------------



--------------------------------------
Mopar Intake
Mopar Exhaust / Bolar (No Cat)
Mopar BOV
Mopar Stage 1 PCM
Mopar Stage 1 Susp.
Mopar Front & Rear Strut Tower Bars
MSD Ignition & 8.5MM Wires
3" Downpipe
--------------------------------------------------
Im still Thinking about going stage 3 in about a year, but not sure yet.
Here are a few pictures i have
----------------------------------------------



holy huge friggin pictures batman!!!! i'm matt, i live in florida, i've got a black 05 that was recently molested by some parts thieves. she's almost back together, and i can't wait. i don't list mods anymore, or locations, but if you're in the central florida area, shoot me a pm.




