95 dodge truck conversion to 2005 wheels
#1
95 dodge truck conversion to 2005 wheels
Has any one converted a 95 dodge 1500 ram to the new 2005 20" wheels?
I have 5 X 5 1/2 w/ 1/2" 20 studs on the truck. The 05 wheels are the same bolt pattern but 9/16 studs. When you push them on the front the bearing cover pushes the center cap out of the 05 wheel. I was told that an 1 1/2" spacer 5 X 5 1/2 to 5 X 5 1/2 would work. But the 1/2" lug nuts look a little small to me. Is 1 1/2" spacer OK or do I need to go to 2" and 1/2" lug nuts OK?
Also, what thread is the 9/16 2005 stud?
Thanks Mark
I have 5 X 5 1/2 w/ 1/2" 20 studs on the truck. The 05 wheels are the same bolt pattern but 9/16 studs. When you push them on the front the bearing cover pushes the center cap out of the 05 wheel. I was told that an 1 1/2" spacer 5 X 5 1/2 to 5 X 5 1/2 would work. But the 1/2" lug nuts look a little small to me. Is 1 1/2" spacer OK or do I need to go to 2" and 1/2" lug nuts OK?
Also, what thread is the 9/16 2005 stud?
Thanks Mark
#2
RE: 95 dodge truck conversion to 2005 wheels
Welcome to the site Tgrush!
You might want to post this in the second generation Ram forum located here for better results.
https://dodgeforum.com/forumid_105/tt.htm
-Matt-
You might want to post this in the second generation Ram forum located here for better results.
https://dodgeforum.com/forumid_105/tt.htm
-Matt-