Hello and help
#1
03-29-2013, 11:13 AM
Join Date: Mar 2013
Location: Racine, Wisconsin
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Hello and help
I have a 06 Grand Caravan. The horn does not work at horn pad or panic button
I applied voltage directly to the horn and it blew. Fuse and relay are good.
Placed a wire from 86 to 87 at horn on the ICP and horn blew. I replaced the FCM without success. I looked under the ICP and nothing jumped out as looking bad. What would prevent control voltage from reaching the relay?
Any help will be appreciated.
Thanks
I applied voltage directly to the horn and it blew. Fuse and relay are good.
Placed a wire from 86 to 87 at horn on the ICP and horn blew. I replaced the FCM without success. I looked under the ICP and nothing jumped out as looking bad. What would prevent control voltage from reaching the relay?
Any help will be appreciated.
Thanks
#2
03-29-2013, 12:11 PM
Hello and welcome to DF. Check out the Caravan sections and post your questions there. Folks in those sections are going to be a lot more knowledgable regarding your issue. That section ca be found here:
https://dodgeforum.com/forum/dodge-caravan-23/
https://dodgeforum.com/forum/dodge-caravan-23/
