New Member Area New to DF? Stop in tell us about yourself and your ride. Please post technical questions in the tech sections.

New member.

Thread Tools
 
Search this Thread
 
Old Mar 22, 2020 | 10:14 PM
  #1  
kkeller14k's Avatar
kkeller14k
Thread Starter
|
Registered User
Joined: Mar 2020
Posts: 4
Likes: 0
Default New member.

Well hello everyone! I am not a newbie to forums but this one is long over due. Let us get acquainted. I have a 2002 3500 with a HO Cummins with 275 Bosh injectors and a 6 speed trans.( A huge back story about the engine) To date I have just over 100 thousand miles (very low). It is leather loaded with dual power seats. A quick run down of options; K&N filter, Fass lift fuel pump with pillar mounted pressure gauge.. I have the trailer tow mirrors, and I have every tow option available. Frame mounted camper hold downs with fast guns, B&W 18K 5th wheel hitch, class 3 hitch with 41 and 48 inch stingers, Husky weight distribution hitch..with custom fitted Firestone air bags, an on-board compressor and in cab air bag controller. Just need the Banks exhaust brake, a Buckstop bumper and a full locker front end on the Dana 60 and it will be complete...regardless it has been a labor of love and it will most likely be the last truck I will own.

No Graphics!
 

Last edited by kkeller14k; Mar 22, 2020 at 10:52 PM.
Reply
Old Mar 23, 2020 | 07:08 AM
  #2  
jkeaton's Avatar
jkeaton
DF Admin
15 Year Member
Photogenic
Photoriffic
Liked
Joined: Apr 2010
Posts: 28,212
Likes: 367
From: Winston Salem, NC
Default

Welcome!
 
Reply
Old Mar 23, 2020 | 07:10 AM
  #3  
HeyYou's Avatar
HeyYou
Administrator
Veteran: Air Force
Community Favorite
15 Year Member
Community Builder
Joined: Apr 2010
Posts: 87,482
Likes: 4,223
From: Clayton MI
Default

Welcome to DF! Check out the 2nd gen ram section, or the diesel section. Either should work.
 
Reply
Old Mar 23, 2020 | 02:27 PM
  #4  
kkeller14k's Avatar
kkeller14k
Thread Starter
|
Registered User
Joined: Mar 2020
Posts: 4
Likes: 0
Thumbs up

Thanks! Got a lot of reading and catching up to do...
 
Reply
Old Mar 23, 2020 | 02:29 PM
  #5  
kkeller14k's Avatar
kkeller14k
Thread Starter
|
Registered User
Joined: Mar 2020
Posts: 4
Likes: 0
Default

Sorry put that in the wrong section...I will get up to speed.
 
Reply
Old Apr 3, 2020 | 03:28 PM
  #6  
hughesjasonk's Avatar
hughesjasonk
Amateur
Joined: Apr 2020
Posts: 26
Likes: 0
Default

looks good
 
Reply




All times are GMT -4. The time now is 12:08 PM.