Just dynoed my shelby CSXT
#1
Just dynoed my shelby CSXT
Just got back from the big Chryslers at Carlisle show. I dynoed the car saturday. I put up some good numbers. It was done on a dynojet with air temp of 79.3 deg. and barometric pressure of 29.63 in.Hg. the pull was at 19-20 psi boost Max H.P. was 251.9 @ 4700 RPM . Max Torque was 300.9 ft-lbs @ 4100 RPM. I NEED A BIGGER INTERCOOLER.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
#3
RE: Just dynoed my shelby CSXT
I still have the stock intercooler. It is killing the HP . I hit the 250 hp mark a 4400 RPM and it just flat lined all the way to 6000 RPM never droping below 247 hp. There is no spike or peak on the graph it just goes to 250 HP , hits a brick wall and flat lines.
#7
RE: Just dynoed my shelby CSXT
Oh heck no. I wish I went. I was in Minneapolis for a wedding. I'm not sure I'm going to make any Mopar shows for the remainder of the season.
That's a pretty good number you laid down. Was any of the major Mopar mags covering the dyno runs. It seems like mopar muscle, or another have covered the dyno's the last couple of years.
That's a pretty good number you laid down. Was any of the major Mopar mags covering the dyno runs. It seems like mopar muscle, or another have covered the dyno's the last couple of years.
Trending Topics
#8
#10