OK, so I measured my wheelwells last night, the front is 38" and the rear is 41". This is with a QC 4x4 with 20x9 rims. I would like to be able to have the truck sit level, put a 36" tire on it (stocks have a 33" diameter) but not get into lengthening the driveshaft. So my question is, can I just lift the front up 3" and put 36's on, or do I have to do an all around lift?

Thanks for any help you can provide.

-Mike

 

From what I've read you can buy a 2.5" front leveling kit and be able to clear 35's. Not sure I haven't done mine yet but everything I have read says that you can.

 

have you heard any problems with an 07 laramie with the electronic skid protection?

 

its all fine to measure the wheel whels but your gonna rub on the valance and the inner fender well ever time you hit the smallest bump or turn.

go big or dont go at all


[IMG]local://upfiles/79126/4B202EAAB0924493A93693CF32409176.jpg[/IMG]

 

try this leveling kit, cheap and a good product. Found this on Ebay for $79.95.

http://store.topguncustomz.com/store...mp;i=152336146