DodgeForum.com
98 column in the 97. Dash still torn apart and bungee cord to keep the brake light off.
98 column in the 97. Dash still torn apart and bungee cord to keep the brake light off.
0 2016/06/13 18:33:34
97 Floor with with 98 4X4 shifter fit in. The big hole between the 2 sticks was filled in with a piece of flashing, Siliconed and screwed down.
97 Floor with with 98 4X4 shifter fit in. The big hole between the 2 sticks was filled in with a piece of flashing, Siliconed and screwed down.
0 2016/06/13 18:30:05
Destructions. High Res pictures, lets hope the rest of it is as good.
Destructions. High Res pictures, lets hope the rest of it is as good.
0 2016/06/13 17:37:43
SOOOO SHIIIINNEY :)
SOOOO SHIIIINNEY :)
0 2016/06/13 17:37:20
Victor Gasket set included. Nice upgrade from the normal china made cardboard.
Victor Gasket set included. Nice upgrade from the normal china made cardboard.
0 2016/06/13 17:36:55
0 2016/04/12 19:13:25
0 2016/04/12 19:12:14
0 2016/04/08 20:57:19
0 2016/04/08 20:56:07
New gauge installed.
New gauge installed.
0 2016/04/01 18:49:28
Stock gauge.
Stock gauge.
0 2016/04/01 18:47:02
This is the opening screen for my device updater.
This is the opening screen for my device updater.
0 2016/03/29 18:50:47
Fel-pro head gasket. Looks pretty.
Fel-pro head gasket. Looks pretty.
0 2016/02/22 18:01:13
Looking at the valley. One head is bolted down.
Looking at the valley. One head is bolted down.
0 2016/02/22 18:00:05
New damper with mark at 0. Timing mark run from 0* to 60*, and there are marks every 90* from 0.
New damper with mark at 0. Timing mark run from 0* to 60*, and there are marks every 90* from 0.
0 2016/02/22 17:57:17
Front View.
Front View.
0 2016/02/22 17:55:51
0 2016/02/20 12:46:54
Looking down the intake runner.
Looking down the intake runner.
0 2016/02/20 10:25:11
Looking down the exhaust runner.
Looking down the exhaust runner.
0 2016/02/20 10:24:54
Harlands on the head.
Harlands on the head.
0 2016/02/20 10:24:38
Bling out of the wrapper.
Bling out of the wrapper.
0 2016/02/20 10:24:24
Stock replacement Harland Sharp roller rockers. 5/16 pedestal mount 1.6:1 ratio
Stock replacement Harland Sharp roller rockers. 5/16 pedestal mount 1.6:1 ratio
0 2016/02/20 10:24:06
With the clip installed. That is compressed height with this solid lifter.
With the clip installed. That is compressed height with this solid lifter.
0 2016/02/20 10:19:40
Put back together without the clip. Trying to show installed height.
Put back together without the clip. Trying to show installed height.
0 2016/02/20 10:18:25
Making a solid lifter. Leave the spring out, turn the plunger over so the nipple is facing up (or out depending on how you want to word it), Reinstall with the rod seat sitting as normal, then install the clip.
Making a solid lifter. Leave the spring out, turn the plunger over so the nipple is facing up (or out depending on how you want to word it), Reinstall with the rod seat sitting as normal, then install the clip.
0 2016/02/20 10:07:01
Left to right; Lifter body, spring, plunger, rod seat, retaining clip..
Left to right; Lifter body, spring, plunger, rod seat, retaining clip..
0 2016/02/20 10:01:52
Out cutting firewood. I had backed up the hill so i didn't have to carry the wood as far. Yes, the photo is vertical, not sloped either way.
Out cutting firewood. I had backed up the hill so i didn't have to carry the wood as far. Yes, the photo is vertical, not sloped either way.
0 2016/02/20 09:46:10
Close up of new light. Had to massage the fender up a little so the clearance light would fit.
Close up of new light. Had to massage the fender up a little so the clearance light would fit.
0 2016/02/20 09:39:25
Close up of the old light. Lens was cracked, so every time we got any precipitation it would blow the bulb. Turn signal worked fine, even when it was clear full of water.
Close up of the old light. Lens was cracked, so every time we got any precipitation it would blow the bulb. Turn signal worked fine, even when it was clear full of water.
0 2016/02/20 09:36:35
Comparison of old vs. new headlights. Don't mind the beauty mark lol.
Comparison of old vs. new headlights. Don't mind the beauty mark lol.
0 2016/02/20 09:34:53
Test fitting the Harland Sharps.
Test fitting the Harland Sharps.
0 2016/02/19 19:24:55
Poor Packing job.
Poor Packing job.
0 2016/02/11 21:17:13
Adjuster busted off the housing.
Adjuster busted off the housing.
0 2016/02/11 21:15:52
This is how it was packed, with a piece of cardboard over.
This is how it was packed, with a piece of cardboard over.
0 2016/02/11 20:07:07
Broken at the adjuster.
Broken at the adjuster.
0 2016/02/11 20:06:20
Tightening sequence and torque specs. Tighten in 3 stages... 24 inch pounds, then 48 inch pounds, then final torque at 84 inch pounds.
Tightening sequence and torque specs. Tighten in 3 stages... 24 inch pounds, then 48 inch pounds, then final torque at 84 inch pounds.
0 2016/01/30 23:26:21
Setting the pick up tube. 8.5"
Setting the pick up tube. 8.5"
0 2016/01/23 20:28:07
Measuring oil pan depth to set the pickup tube. 8.75" deep.
Measuring oil pan depth to set the pickup tube. 8.75" deep.
0 2016/01/23 20:24:23
Setting the pickup tube at 8.5". Should leave about 1/4" gap between the pickup and pan.
Setting the pickup tube at 8.5". Should leave about 1/4" gap between the pickup and pan.
0 2016/01/23 20:19:10
Measuring the oil pan depth to set the pickup tube. 8.75"
Measuring the oil pan depth to set the pickup tube. 8.75"
0 2016/01/23 20:18:00