1997 DODGE INTREPID WON'T START
#1
1997 DODGE INTREPID WON'T START
WE WERE PULLING IN TO THE DRIVE WAY THE OTHER AFTERNOON AND THE CAR DIED AND WON'T START. IT STILL TURNS OVER. THE BATTERY IS NEW. THERE IS NO SPARK WHEN YOU CRANK IT OVER. A) HOW CANI CHECK TO SEE IF THE COIL IS WORKING B) AND HOW CANI CHECK THE CRANK SENSOR. THEY ARE THE ONLY THINGS THAT COME TO MIND. IF ANYONE HAS ANY IDEAS I WOULD BE GREATLY APPRECIATED.
#2
#3
#4
Ok, question first. Does your check engine light come on when you turn the key on? If not, you probably have a wire touching(grounding out) on your engine or something. Thats why your fuse keeps blowing when you put a new one in. Try pulling your main wire harness away from the engine and tie it up. Also check the other wires. Then put a new fuse in and see if it starts. If you now have a lit check engine light but the car still will not start, change the pcm. This means that it got shorted out from the wire touching. The fuse couldn't protect it but so many times. You can pick one up from any junk yard pretty cheap to see if im right. U-pull it junk yard are the best in this case. Probably about $20. Take the numbers off of yours to make sure you get the same one. Let us know how you make out. This helps this site alot. Good luck
#5
#7
55 means you have reached the end of the codes stored. So all in all, they mean nothing too much.
Trending Topics
#9
95 Intrepid v6 3.5 wont start
Yesterday I was coasting to a tollbooth and my car slightly backfired "puff, puff" and then died and will not restart. It turns over but won't start. Changed coil pack and still will not start I smell gas when I try to start it so I don't think it's the fuel pump or the fuel filter. Checked all fuses and relays and all were good but changed anyway. If you have any ideas that I could try please let me know. I don't know if you can call me so my # is 267-720-7094. Thank you
Logan
Logan
#10
My son was driving my '97 3.5 the other day when the water pump sprung a leak, replaced it and made sure the timing belt was undamaged but now it won't start. Replaced battery cause it was cranking at half speed, no help. Also replaced the coil just in case. Starter is only 6 months old. Anyone know why it cranks so slow and won't start?