When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
1st Gen Ram Tech'93 & older Rams: This section is for TECHNICAL discussions only, that involve 1993 Rams and older. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
I have on mine that I was going to sell soon. here is the only picture i have right now while it was on the truck, Its already off and I put a new grill on it already. Let me know.
also just found this site for you.. http://www.customgrills.com/ it says 81 to 85 but im sure it will fit 81 to 90 trucks just a litte mod to the grill frame on your truck if its a 86 to 90 like mine, They just had to cut away some of the grill frame to make it fit. even when i put the old one back on you could not notice the cuts as they were only like 1/4 of a inch
If you want to put a 81-85 grille on your truck, swap the rad support from a salvage yard. the rad support is the difference, and I believe is how the 84's can get a 93 grille put on..... So I have heard, and so I am going to try soon. I have a 84, and have put a 86 grille like the one crazzywolfie has shown, I didnt have to change the rad support for that one but it is not a pefectly flush match.
there are no aftermarket billet grilles for these trucks... you can take a 72-79 gm billet grille from LMC truck remove the bottom billet bar and 1 inch from each side and it will fit... then just make some new brackets and bingo you got a billet grille
there are no aftermarket billet grilles for these trucks... you can take a 72-79 gm billet grille from LMC truck remove the bottom billet bar and 1 inch from each side and it will fit... then just make some new brackets and bingo you got a billet grille