Front end rumble?
#1
Front end rumble?
Ok, so I replaced all bushings upper and lower, both outer tie rods and all ball joints on both sides.
I've never driven a 4x4 with IFS, it still seems I am getting what could be characterized as a rumble or slight clunk and maybe a shimmy when I hit some rough spots on the road. Its not bad, but I'm wondering what to check next.
Like I said, this may be normal for an IFS 4x4, but I can't compare it to when the truck was new.
I've never driven a 4x4 with IFS, it still seems I am getting what could be characterized as a rumble or slight clunk and maybe a shimmy when I hit some rough spots on the road. Its not bad, but I'm wondering what to check next.
Like I said, this may be normal for an IFS 4x4, but I can't compare it to when the truck was new.
#5
Shocks are new, outer tie rods are new. I checked the inners from a laymans point of view and they seemed very tight with no play at all.
Its like when you hit a bump the front end gets loose for a second. You feel it in the steering wheel.
I did all bushings,top and lower arms, how tight do you make those nuts holding the arms on. I can crank them to the point that the frame support will bend in a bit?
Its like when you hit a bump the front end gets loose for a second. You feel it in the steering wheel.
I did all bushings,top and lower arms, how tight do you make those nuts holding the arms on. I can crank them to the point that the frame support will bend in a bit?
#6
#7