Hello,

I have been searching past posts about coil springs and leveling kits. I have a 1999 Ram 1500Sport 4x4. I recently picked up a set of coil springs from a 2007 Ram 2500 4x4 Diesel. Will the 2007 springs work under my truck? Will they give me the 1.5 - 2" of lift that I need. They still have the part number tag on them, but I forgot to check the numbers. Any advice will be greatly appreciated.

THANKS,
David

 

i don't think they would work...but if they do it should give you that 2 or so inches of lift...but it'll ride like a tank

 

The springs for the diesel, IMHO, would be a heavy duty spring to allow for the weight of the cummins. If they did fit, which i don't think they will (not sure tho) the ride will be really stiff and i bet you will take them right back out. Just my 2 cents tho.

 

check the diameter of the spring against what you have in there now, coil thickness & width of the coils (side to side), they should work ok. the front end of the 2500/3500's is the same basic setup as the 2nd gen trucks. in the Info thread at the top, there is a link to the coil page that shows what coil has what height etc... check it out...

 

oops, btw, I ran 2500 springs on my 2000 1500 and had no problems. the ride was stiffer however alot of that has to do with what shock you use.

 

Hello,

Thanks for the info. I hope to trythe spring soon, and will post back and let everyone know how they work.

THANKS