When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
2nd Gen Ram Tech1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
QUESTION Has anyone put a 2001 dana 60 disk brake rear end in a 99 Rwd I have a 99 2500 Rwd Dana 60 with a 355 gear and want to change it to a 410 they say you can just bolt a 2001 with disk brakes in ?????? or am I beating a dead
i swapped in a dana 70 on my ram and i had to swap over the wheel speed sensor cuz it was a different connection type. the driveshaft hookup was different also, it wasnt a flange type it was the bolt-strap kind. and the leafs perches were to wide since the 2500 has wider springs, so i had to shave the perches. but other than that it was easy. like i said that was a dana 70 the 60 might not have to be modded
He already has a 3/4 ton, so, springs won't be an issue. I DID miss the part about "rear disk brakes" though. That may require the master cylinder/proportioning valve from the axle donor. E-brake cables are going to be different as well.