When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
2nd Gen Ram Tech1994-2001 Rams: This section is for TECHNICAL discussions only, that involve the 1994 through 2001 Rams. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
I have a few questions. I want one, I have a 2000 dodge with the alarm (the correct CTM for this) What do I need and anything I need to know before I go yard hunting?
If you already have the correct CTM, then it should be just a matter of grabbing the sensors, and the console itself, and sticking it in there. Chances are good the wiring is already in place.
Check out some of the others that a search will bring up. Read thru 'em. only difference between those, and yours, is going to be that you need fewer parts. Drop the current console, and verify the wiring harness is there. If it is, all you need are sensors, and the console. Should be plug and play.
I dropped the console, wiring harness is NOT there, but then stroke of luck, I found it looped and stuck up over the steering column attached to the CTM. Strange thing, I didn't think you could get the factory security system without the trip computer.