like u said my car wont start.it is a 95 2.0 i have relpaced the pcm the plugs and wires the fuel pump the crank shaft censer. umm batt and alternater. i get spark and it cranks but it wonr turn over. my asd relay does turn off and on though what shoud i do???

 

next obvious question are you getting gas ???

 

i believe so...when i wave a screw driver in front of the crack shaft cencer i hear the fuel pump turn on.....is there any other ways to check...

 

When you turn the key to the on position, before you start the car, listen for a whine or humming noise, that's your fuel pump priming. If you don't hear that, you're not getting fuel.

 

Will the engine crank over at all ? And do you have compression?

 

i dont hear any whine noise or any noise at all!!!???? and idk if i have any comperssion but it cranks hard like it wonts to start it just wont.

 

the guy i am having work on my car still insits that the pcm we had sent off to be re calibrated in still now good. he has found one off a neon with that he says is the same moter. my question is can i take a pcm off of it or a eclipse or a sebring or a talen or fo they have different settings???