Just wondering how i would go about installing keyless entry into my venge. Would it be difficult or easy? Thanks

 

Wire - Color - Location

Constant - 12V+ White - Ignition Switch Harness
Starter - Black/Red - Ignition Switch Harness
Ignition - Black/White - Ignition Switch Harness
Ignition 2 - Blue - Ignition Switch Harness
Accessory - Blue/Black - Ignition Switch Harness
Tach - Brown - Coil
Neutral Safety Wire - Black/Yellow (-) - Switch Driver's Side of Transmission
Brake Switch - Green - Brake Switch
Trunk Pin - Red/Green (-) - Trunk Light
Parking Lights - Green/White - Left of Steering Column
Head Lamp - Red (-) - Steering Column Harness
Door Trigger - Red/Black (-) - Driver's Kick Panel
Door Lock - Brown/White (-) - Driver's Kick Panel
Door Unlock - Brown (-)
Horn Wire - Green/Black (-) - Steering Column White 3 Pin Connector
Windows Up - LF=Green/Red, RF=Brown/Yellow MAIN
Windows Down - LF=Green/Black, RF=Green/Yellow


This is the wiring for remote start/keyless/alarm system ... unless you are fairly profescient with electrical work it's probably best to have it professionally installed ... We run a remote start keyless for $99 installed

 

OOHH!!! I thought they were $200 I want one. Who u work 4?

 

I ran a shop before ... There are several shops here that still run the special