96' Avenger Multiple Misfires
#1
11-18-2007, 08:38 PM
Thread Starter
Join Date: Mar 2007
Location:
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
96' Avenger Multiple Misfires
Hi Everyone!
I'm a newbie. I'm getting a code #43 multiple mis-fires. This is a 4cyl DOHC Coupe. I've changed plugs, wires, coil pack, pvc valve. Camshaft sensor and Crank Sensor were also changed about 15K ago for intermittent shutoffs. Can't get this engine light off. Whenengine lightflashes, I can feel the car jerk. Also jerks really bad if I turn off the OD by mistake. Someone suggested I may have a leak in the manifold gasket. Any other less labor intensive ideas that I can try first? I have one month to get this to pass emmisions.
Sparkie
I'm a newbie. I'm getting a code #43 multiple mis-fires. This is a 4cyl DOHC Coupe. I've changed plugs, wires, coil pack, pvc valve. Camshaft sensor and Crank Sensor were also changed about 15K ago for intermittent shutoffs. Can't get this engine light off. Whenengine lightflashes, I can feel the car jerk. Also jerks really bad if I turn off the OD by mistake. Someone suggested I may have a leak in the manifold gasket. Any other less labor intensive ideas that I can try first? I have one month to get this to pass emmisions.
Sparkie
#2
11-18-2007, 08:57 PM
RE: 96' Avenger Multiple Misfires
I'd recheck work done ... Did the plugs look dry ??? No oil ???
Other possibles are :
Ignition coil / Spark plugs / Ignition circuit / Injector / Upstream HO2S / Compression pressure / Timing belt / Crankshaft position sensor / Air intake / Fuel pressure / Crankshaft position sensor circuit and connector
Other possibles are :
Ignition coil / Spark plugs / Ignition circuit / Injector / Upstream HO2S / Compression pressure / Timing belt / Crankshaft position sensor / Air intake / Fuel pressure / Crankshaft position sensor circuit and connector