trans wont shift
#1
11-04-2009, 12:44 PM
Join Date: Mar 2009
Location: georgia
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
#2
11-04-2009, 04:45 PM
ya it wont shift at all no matter what yall tri cuz the computer does all the shifting. it could be a sensor, solinoid, wiring, comptuer, relay, fuse, and some other stuff, yall can guess but them good scanners is the only way to really fix the thing. if there aint enouf info, then its all a stab in the dark. kinda like going to the doc with a broken bone, they dont just guess if its broke, they use tools to diagnose like an x-ray.
#4
11-05-2009, 02:46 AM
Join Date: Mar 2009
Location: georgia
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
It is a 2.5, 99. Bad venge - you are correct. It does move think it winds up to about 40 mph and that's it. Reverse is fine. Circumventor - I posted the question just like everyone would. " I can't be the only one who has experienced this". I'm not expecting a catch all statement to be my savior, but for opinions on what they might have experienced.
#5
11-05-2009, 06:52 AM
#7
11-06-2009, 06:27 AM
You should replace input and output speed sensors, TCM, Solenoid pack, trans relay and range switch assembly. Or just get it properly scanned so you don't waste the time or materials. I see, in just about every transmission post, people are into tossing parts at these transmission problems and lots of suggestions to do so. Yet this process rarely fixes the the problem. A quick scan, not a code reader which only reads PCM and not TCM, doesn't cut it. A scanner is the necessarry tool
Trending Topics
#8
11-06-2009, 09:39 AM
Join Date: Mar 2009
Location: georgia
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Spent $100 for the dealer to tell me I needed a new trans, my buddy pulled the codes for me and sd its elec. Had auto zone scan it they came up with input out sensor, 20 bucks later I have a working trans. Gave the dealer a talking to this morning, gonna reimburse my money. Told service manager I showed up with the codes yest. And they still said need a rebuild,I thank you for all the help.
#9
11-06-2009, 12:00 PM
Spent $100 for the dealer to tell me I needed a new trans, my buddy pulled the codes for me and sd its elec. Had auto zone scan it they came up with input out sensor, 20 bucks later I have a working trans. Gave the dealer a talking to this morning, gonna reimburse my money. Told service manager I showed up with the codes yest. And they still said need a rebuild,I thank you for all the help.