1st Gen Dakota Tech 1987 - 1996 Dodge Dakota Tech - The ultimate forum for technical help on the 1st Gen Dakota.

how much fluid?

Thread Tools
 
Search this Thread
 
Old Dec 19, 2007 | 01:55 AM
  #1  
oglejust's Avatar
oglejust
Thread Starter
|
Rookie
Joined: Dec 2007
Posts: 95
Likes: 0
From:
Default how much fluid?

alright i have an 87 dodge dakota 4x4... how many quarts of tranny fluid does it take if i do a complete flush? im talkin unhook the cooler hose and flush it. also how much does each differential take?
 
Reply
Old Dec 19, 2007 | 03:51 AM
  #2  
Crazy4x4RT's Avatar
Crazy4x4RT
Hall Of Fame
Joined: Aug 2007
Posts: 10,923
Likes: 19
From: NM
Default RE: how much fluid?

My book says 1.75gal of coolent. the diff. 1.25quarts.
 
Reply
Old Dec 19, 2007 | 12:10 PM
  #3  
iraqvet's Avatar
iraqvet
Professional
Joined: Sep 2007
Posts: 120
Likes: 0
Default RE: how much fluid?

Transmission and transmission cooler flush? I can't find anything in the book on capacities, but when I replaced my engine, I drained the torque converter and transmission....those alone took over 6 quarts.

 
Reply
Old Dec 19, 2007 | 07:50 PM
  #4  
dodgerules86's Avatar
dodgerules86
Champion
Joined: Dec 2003
Posts: 4,119
Likes: 5
From: Sycamore, Illinois (displaced to Arkansas)
Default RE: how much fluid?

Tranny fluid - a dry fill takes about 11 quarts. When I flushed the transmission in my '96, I used about 15 quarts. Just run it through until the fluid looks clean, and than a few extra seconds. (Keep in mind, these transmissions don't move the fluid in Park, so a helper is very nice).
Make sure you check your fluid level very good after your done.

Differential varies on which one you have, about 1.5 quarts for the 7-1/4, about 2.25 quarts for the 8-1/4.
Transfer case, probably around 1.25 quarts.
Typically, just fill the transfer case and differentials until the fluid starts pouring out the fill hole.
 
Reply
Old Dec 19, 2007 | 08:46 PM
  #5  
oglejust's Avatar
oglejust
Thread Starter
|
Rookie
Joined: Dec 2007
Posts: 95
Likes: 0
From:
Default RE: how much fluid?

well what if i just change the fluid in the pan and change the filter... will that help extend the life of the tranny?
 
Reply
Old Dec 19, 2007 | 09:09 PM
  #6  
kahanabob's Avatar
kahanabob
Captain
Joined: Sep 2006
Posts: 582
Likes: 0
Default RE: how much fluid?

Only about a quart in the pan, flush it.
 
Reply
Old Dec 19, 2007 | 09:41 PM
  #7  
dodgerules86's Avatar
dodgerules86
Champion
Joined: Dec 2003
Posts: 4,119
Likes: 5
From: Sycamore, Illinois (displaced to Arkansas)
Default RE: how much fluid?

There is about 3-5 quarts in the pan. Most fluid is kept in the torque convertor.
There is some fact to the "if your transmission hasn't been regularly serviced before, don't start now," but it seems to be a little hit or miss.
 
Reply
Old Dec 19, 2007 | 10:42 PM
  #8  
oglejust's Avatar
oglejust
Thread Starter
|
Rookie
Joined: Dec 2007
Posts: 95
Likes: 0
From:
Default RE: how much fluid?

alright ill do the total flush
 
Reply
Old Dec 23, 2007 | 09:04 PM
  #9  
oglejust's Avatar
oglejust
Thread Starter
|
Rookie
Joined: Dec 2007
Posts: 95
Likes: 0
From:
Default RE: how much fluid?

well today i changed the fluid in the rear diff. and it wasnt as easy as i thought... hopefully ill get to the tranny next weekend
 
Reply




All times are GMT -4. The time now is 02:43 AM.