Roll call! Post up Pics!!!
#281
#284
First Gen dakota double din install
kenwood excelon dnx-8120
focal 165 kf components in front
jl audio vr 6.5 components in rear in stock location
kenwood excelon x600f 4 channel
kenwood excelon x1200m mono block
2 kenwood excelon xw1224d 12 inch subs in speced ported box
#286
I recently replaced the Head liner. I only took one picture because it was cold and I had limited time to finish the work. I do plan on banging out the dent in the right rear. I have some minor rust in the bottom of both front panels. It rusted through thanks to the person that owned it prior to myself. He parked it under a pine tree and never cleaned out under the hood cowl? Not sure what to call it but I cleaned it out 2 years ago (now I do it every spring.) and pulled 3 + LB's of dirt and pine needles. Tempted to put up some nylon screening under the cowl.
#287
1987 dakota
here is the link to my gallery pics i added of my 1987 dakota express https://dodgeforum.com/forum/members...ure33589-a.jpg
#288
I recently replaced the Head liner. I only took one picture because it was cold and I had limited time to finish the work. I do plan on banging out the dent in the right rear. I have some minor rust in the bottom of both front panels. It rusted through thanks to the person that owned it prior to myself. He parked it under a pine tree and never cleaned out under the hood cowl? Not sure what to call it but I cleaned it out 2 years ago (now I do it every spring.) and pulled 3 + LB's of dirt and pine needles. Tempted to put up some nylon screening under the cowl.
#289
The fiberglass foam board wasn't damaged on my truck, just the foam backed fabric. I got the foam backed fabric kit and it came with a can of adhesive. The old fabric came right off without issue. I took a soft brush to the old glue and left over foam. I also learned that when re applying glue, wait 4-5 minutes for it to setup otherwise you don't have a tacky surface for the material to adhere.
I got everything from
http://www.yourautotrim.com/
*Note the cans of adhesive are BIG. You shouldn't need two cans for 1 job. I probably have 1/3rd of the can left maybe more.
Sorry for any confusion. If your board is bad then I'd suggest checking out
http://www.jcwhitney.com/headliner-k...d412j1s21.jcwx .
Also you can go to a you pull it and see what's available.
I got everything from
http://www.yourautotrim.com/
*Note the cans of adhesive are BIG. You shouldn't need two cans for 1 job. I probably have 1/3rd of the can left maybe more.
Sorry for any confusion. If your board is bad then I'd suggest checking out
http://www.jcwhitney.com/headliner-k...d412j1s21.jcwx .
Also you can go to a you pull it and see what's available.
#290
ai'm going to have to take a closer look. When I took out the unglued rotten fabric all kind of black dust came down which I took to be mold. I bought a big can of 3M adheasive and I have the fabric but I will look at your sources don't want to do this twice.