6-bolt to 5-bolt
#1
Join Date: Feb 2009
Location: Winnipeg, Manitoba, Canada
Posts: 841
Likes: 0
Received 1 Like
on
1 Post
6-bolt to 5-bolt
i wanna put some nice american racing rims on my truck, but all the ones they have that i really like are 5-bolt pattern. is the a kit or something to where i can change the hub to a 5-bolt pattern?
i want either a set of these:
http://www.carmodifier.com/default.a...0&wheelID=1389
or these:
http://www.carmodifier.com/default.a...0&wheelID=1390
shootin for the first set. not a huge fan of chrome rims tho. too high maintenance to keep them looking good
i want either a set of these:
http://www.carmodifier.com/default.a...0&wheelID=1389
or these:
http://www.carmodifier.com/default.a...0&wheelID=1390
shootin for the first set. not a huge fan of chrome rims tho. too high maintenance to keep them looking good
#2
You will pay more for the adapters than the rims just to warn you. Here ya go.
http://adaptitusa.com/index.asp?Page...TS&Category=10
http://adaptitusa.com/index.asp?Page...TS&Category=10
#3
#4
Join Date: Feb 2009
Location: Winnipeg, Manitoba, Canada
Posts: 841
Likes: 0
Received 1 Like
on
1 Post
well what im shooting for with my truck is a dd/show/track truck. im building a 390 stroker magnum, upgrading to the 46-rh tranny, dropping it 2 inches, putting on a solid top tonneau cover, those rims, with a snazy paint job. probably metallic maroon red with 390 stoker and the mopar sympol etched into the box near the taillights. keeping the chrome bumpers, grille, and mirrors. something along those lines. also debating an OBDII swap too for when i drop in the 390 so that i can install one of those hand held programmers to get decent gas milage when im driving to work and stuff and then to get all the power i need at the track. i want those rims cuz i think they would look really nice for what i wanna do with my truck
#6
Join Date: Feb 2009
Location: Winnipeg, Manitoba, Canada
Posts: 841
Likes: 0
Received 1 Like
on
1 Post
lower stance, and plus its only 2WD so there arent many options for lifting it that im interested in. i can drop it properly 2 inches or lift it 4 inches but not as proper... and also for the lower center of gravity. im hoping to gain a little more traction by lowering it the 2 inches
Last edited by RockGuardedDak; 07-04-2009 at 06:38 PM.
#7
Well if you lift it, you have the choice of 1 or 2 maybe 3 if you truely wanted. As for the tons of options. www.ebay.com is your best friend. We have a small write up on it in the FAQ and FAQ2. Here is a quick search I did. You will have to find the one you want. http://shop.ebay.com/items/__wheel-A...=p3286.c0.m282
Trending Topics
#9