1st Gen Dakota Tech 1987 - 1996 Dodge Dakota Tech - The ultimate forum for technical help on the 1st Gen Dakota.

Won't start unless Check engine light is on.

Thread Tools
 
Search this Thread
 
Old Aug 17, 2009 | 06:54 AM
  #11  
ztekdesign's Avatar
ztekdesign
Thread Starter
|
Registered User
Joined: Jul 2009
Posts: 14
Likes: 0
From: Shawano WI
Angry

Cleaned the TB and replaced the IAC with a mopar one. Still have high idle. I will start and idle at 900 to 1000 when cold. Then as it warms up it will climb to 1200-1300. When I put the tranny in drive, it seems to idle around 800-900. If I shut off the truck when it's warm and restart it then it's at 1000 again for a few seconds and returns to the 1200. I have been checking over all the vacuum lines but don't see anything bad. Runs really good except for that. Starting to frustrate me.
 
Reply
Old Oct 17, 2009 | 04:13 PM
  #12  
resik065l's Avatar
resik065l
Registered User
Joined: Oct 2009
Posts: 10
Likes: 0
From: Clark Co. Washington
Default

I am having very similar problem only resetting the computer doesn't always work. Is the ECU mentioned the same as the PCM (this is what the computer module is called on my '93 Dakota 5.2L 4X4 with auto) ? Thanks. I checked auto parts and they want $189 plus $95 core fee. UGH! Thanks
 
Reply




All times are GMT -4. The time now is 06:46 PM.