1st Gen Dakota Tech 1987 - 1996 Dodge Dakota Tech - The ultimate forum for technical help on the 1st Gen Dakota.

High-flow Injectors?

Thread Tools
 
Search this Thread
 
  #1  
Old 06-01-2010, 09:05 PM
bowhunter2k9's Avatar
bowhunter2k9
bowhunter2k9 is offline
Rookie
Thread Starter
Join Date: May 2010
Posts: 74
Likes: 0
Received 0 Likes on 0 Posts
Default High-flow Injectors?

Hey guys, i have a 92' 5.2L V8. What are the injectors that are on it and what should i go to for highflow? I will be just offroading and normal riding but i want it to run!
 
  #2  
Old 06-02-2010, 12:22 AM
Crazy4x4RT's Avatar
Crazy4x4RT
Crazy4x4RT is offline
Hall Of Fame
Join Date: Aug 2007
Location: NM
Posts: 10,926
Received 16 Likes on 15 Posts
Default

For stock setup I say stay stock. If you were upgrading everything the higher rate fuel injectors would be required.

Here are ratings of injectors. This post is also located in the FAQ2.

Engine Years Flow rate in lb/hr
Neon ( All) 23.9
2.5 Magnum 91-95 17.4
2.5 Magnum 96-01 23.2
4.0 Jeep 91-95 21.4 (Equivalent to Lucas 5207013 )
4.0 Jeep 96-01 23.2 (Equivalent to Lucas 5208005 )
5.2 Magnum 92-95 18.2
5.2 Magnum 96-01 23.2
5.9 Magnum 93-95 24.5
5.9 Magnum 96-01 23.2 (Seimens/Chrysler P/N 53030778)
 
  #3  
Old 06-02-2010, 12:43 AM
bowhunter2k9's Avatar
bowhunter2k9
bowhunter2k9 is offline
Rookie
Thread Starter
Join Date: May 2010
Posts: 74
Likes: 0
Received 0 Likes on 0 Posts
Default

sorry bout that, didn't see it.... and I look through there a lot. BTW did you trim your fenders a good bit in the front? I will be having almost same setup, I changed my mind from 35's to 33's because i'm getting 4.10's.
 
  #4  
Old 06-02-2010, 12:45 AM
Crazy4x4RT's Avatar
Crazy4x4RT
Crazy4x4RT is offline
Hall Of Fame
Join Date: Aug 2007
Location: NM
Posts: 10,926
Received 16 Likes on 15 Posts
Default

Yes I did. But it was before I got Indexed torsion bar keys. So now days it is not needed.
 
  #5  
Old 06-02-2010, 06:03 PM
bowhunter2k9's Avatar
bowhunter2k9
bowhunter2k9 is offline
Rookie
Thread Starter
Join Date: May 2010
Posts: 74
Likes: 0
Received 0 Likes on 0 Posts
Default

thanks for the info!
 



Quick Reply: High-flow Injectors?



All times are GMT -4. The time now is 09:37 AM.