1st Gen Dakota Tech 1987 - 1996 Dodge Dakota Tech - The ultimate forum for technical help on the 1st Gen Dakota.

master cylinder lines to proportioning valve

Thread Tools
 
Search this Thread
 
Old Aug 20, 2011 | 09:31 PM
  #1  
hogback's Avatar
hogback
Thread Starter
|
Professional
Joined: Aug 2011
Posts: 147
Likes: 0
From: Angola IN
Default master cylinder lines to proportioning valve

ok just need quick help can somebody see on their Dakota if the line that is closest to the front on the master cylinder goes to the place closest to the front on top of the proportioning valve thanks and where can i get a new T fitting for the front where it comes from the prop valve and then splits to the 2 front wheels
 
Reply
Old Aug 21, 2011 | 07:13 PM
  #2  
Crazy4x4RT's Avatar
Crazy4x4RT
Hall Of Fame
Joined: Aug 2007
Posts: 10,923
Likes: 19
From: NM
Default

I hope this pic helps from the service manual which you can download from the FAQ in this section if you need more help or diagrams. As for the T fitting try your local Dodge Dealer parts department or Napa or your local junkyards.

 
Reply
Old Dec 7, 2013 | 10:27 AM
  #3  
ldaniels12467's Avatar
ldaniels12467
Registered User
Joined: Dec 2013
Posts: 1
Likes: 0
Default

dodge brake proportioning valve diagram for 1993 ram 350 5.9L or chassis wiring diagram
 
Reply




All times are GMT -4. The time now is 04:13 AM.