hi guys i have a 1995 dodge dakota and i replaced the IAC valve and it improved a little bit but the truck is still stalling when warm doesnt stall when cold just when engine is warm any help would be great thank you

 

Since it only does it once it warms up, possibly a bad coolant temp sensor or O2 sensor.

 

there are no trouble codes wouldnt a cts sensor and o2 sensor set off a code just wondering

 

Not all bad sensors set off codes. Only dead sensors sets off codes, but they don't have to be dead to be bad.

 

I have a 1995 3.9 auto dakota it stalls or my say loss of power checked fuel presser and volume test all ok checked sync its prefect new cap rotor pick up coil plugs wires new fuel pump clened injecters check map senor check for vacume leacks check timing chain no code new cat and muffler new egr valve iam lose any ideas when you hold gas at 1500 rpms the idea drops cleaned tb checked tps put it on a scan tool didnt find anything please help

 

Use punctuation and spell checker, so people can read what the hell you're trying to say.

 

Try the crank sensor its on pass side below the egr pipe two Allen head bolts.frst grab the wires and give them a pull.My 95 had the same problem replaced fuel pump cap roter ign coil ect. beat me up for a couple weeks but it runs great now hope that this helps.