Bed light bar aka roll bar pics.
#21
04-07-2016 | 12:04 AM
Amateur
Joined: Feb 2015
Posts: 29
Likes: 0
From: SW Idaho
So I know this is a really old thread, but I just bought a 93 dakota and it came with this bar. I was wondering if anyone knew where to plug it in. I have the wires coming out of the bottom of the bar from the lights, but can't figure out where to plug it in. I looked through my Haynes book, but it just shows how to remove the bar
#22
04-07-2016 | 04:17 PM
Registered User
Joined: Mar 2016
Posts: 2
Likes: 0
I don't think there's any wiring harness to plug into, but I have been wrong before. Personally, I'd just bolt the ground wire to the frame, run the positive in to the cab somehow, add a switch and a fuse coming off the fuse block and problem solved. Extra wire and a switch should be under $15 easily and wouldn't take more than an hour if you know how to crimp wires together. Soldering is better IMO.
#24
04-15-2016 | 12:01 AM
Thread Starter
|
Hall Of Fame
Joined: Aug 2007
Posts: 10,926
Likes: 16
From: NM