2.5 hanging throttle
#1
2.5 hanging throttle
The symptom is:
Engine does not come back down to normal idle speed quickly, it hangs for a 3-4 seconds after releasing the throttle. It started doing this randomly several weeks ago.
Otherwise the engine seems to run fine.
What I have done:
new IAC
New wires, plugs, distributor, ignition coil
Unplugged the computer for 30 minutes in attempt to reset it
All to no avail. What do you guys think?
Thanks
Engine does not come back down to normal idle speed quickly, it hangs for a 3-4 seconds after releasing the throttle. It started doing this randomly several weeks ago.
Otherwise the engine seems to run fine.
What I have done:
new IAC
New wires, plugs, distributor, ignition coil
Unplugged the computer for 30 minutes in attempt to reset it
All to no avail. What do you guys think?
Thanks
#4
#6
Or find a matching truck in the boneyard with a good set.
Just as a suggestion: If you use the old hard line to stub into some silicon or rubber vacuum line, I'd use some Automotive Goop to seal that with since you really don't want to clamp onto the old plastic and break it of fworse.
RwP