My 1994 dokota turn signals and brake lights and hazard lights stoped working but the brake light on the tail gate still works. I checked the fuse and the blinker module they are OK. What else could I check?

 

I would venture to say pretty certain that it is the turn signal switch mounted on the column... The brake switch is wired directly to the three brake light so that it doesn't blink like the others... But the other lights all run through the blinker switch mounted on the column. I assume that your running lights work correctly, which would say the wiring harness is functioning and not unplugged.



Later Daze,
Shorty

 

Thanks for the quick response, I'll check it out let you know

 

I changed the turn signal switch on the column.That fixed my tunn signals but not my brake lights or flashers. The running lights and my center brake light on my tail gate have always worked. What else I can try?

 

for your flasherslook for a second flasher however the hazzards and brake lights are on the same circuit

 

it should have two flasher cylinders, caddy corner to each other above the fuses