1st Gen Dakota Tech 1987 - 1996 Dodge Dakota Tech - The ultimate forum for technical help on the 1st Gen Dakota.

1992 Error Code 41

Thread Tools
 
Search this Thread
 
  #1  
Old 12-14-2009, 08:53 PM
stymie222's Avatar
stymie222
stymie222 is offline
Amateur
Thread Starter
Join Date: Jun 2009
Posts: 29
Received 0 Likes on 0 Posts
Default 1992 Error Code 41

I have a problem with readings on my battery gauge. All my lights are dimming and getting over bright while the gauge shows a decrease and increase in voltage.
1992 Dakota 3.9L LE

I just had a new alternator installed but still have the problem.

Error code 41- Generator feild not switching properly.

I suspect the ECM and voltage regulator that is built in.

Any suggestions are welcomed, especially a reliable company to buy a new or rebuilt unit. It looks like I can probably install this myself ??

Also had failure of EGR sytem which should be unrelated and will post elsewhere.

Thanks
 

Last edited by stymie222; 12-14-2009 at 08:55 PM. Reason: add content
  #2  
Old 12-14-2009, 11:11 PM
Crazy4x4RT's Avatar
Crazy4x4RT
Crazy4x4RT is offline
Hall Of Fame
Join Date: Aug 2007
Location: NM
Posts: 10,926
Received 16 Likes on 15 Posts
Default

If it is not the alt. It is a wire problem. Or a computer problem. But most likely it is a wire problem. Check the alt first. Take it to most auto parts stores they can test it for free.
 
  #3  
Old 12-15-2009, 12:49 AM
stymie222's Avatar
stymie222
stymie222 is offline
Amateur
Thread Starter
Join Date: Jun 2009
Posts: 29
Received 0 Likes on 0 Posts
Default Info

New Alternator professionally installed and checked for proper voltage- but will retest.

Could the ASD relay cause this problem ?

Severe fluctuation of volt meter (pegs all the way down and up).

Lights dim severely and then over bright.

Thanks
 
  #4  
Old 12-15-2009, 12:54 AM
Crazy4x4RT's Avatar
Crazy4x4RT
Crazy4x4RT is offline
Hall Of Fame
Join Date: Aug 2007
Location: NM
Posts: 10,926
Received 16 Likes on 15 Posts
Default

No the ASD relay will not cause it.
 
  #5  
Old 12-17-2009, 01:59 PM
stymie222's Avatar
stymie222
stymie222 is offline
Amateur
Thread Starter
Join Date: Jun 2009
Posts: 29
Received 0 Likes on 0 Posts
Default Update

Installed used ECM/ECU Module

Everything works !

Thanks- Great Forum !
 
  #6  
Old 12-17-2009, 04:21 PM
Crazy4x4RT's Avatar
Crazy4x4RT
Crazy4x4RT is offline
Hall Of Fame
Join Date: Aug 2007
Location: NM
Posts: 10,926
Received 16 Likes on 15 Posts
Default

Glad you got it working!
 



Quick Reply: 1992 Error Code 41



All times are GMT -4. The time now is 03:18 PM.