Hey shrpshtr, if you would post that procedure please...my D doesn't chirp horn or flash lights when I lock/unlock it and it is really annoying!!! If u post it maybe I can get mine to work. Thanx!

 

np, ill post it tomorrow(the manual lives in my glovebox and i dont feel like going out in the cold right now )

 

Thanx man, know what you mean. I'm sittin in my worktruck in a plant in NJ right now and I don't wana get out to get my work done, lol. Its about 25 deg outside, long freagin day.

 

where in NJ? i live and go to school in NJ . . .

 

ok here it is, since i dont have a scanner i have to type it out for ya, you owe me for this BTW!!!!!!

1. Enter your vehicle and close all doors
2. Fasten your seatbelt (this turns off any possibly confusing chimes during the procedure)
3. Place the key in the ignition
4. Turn the ifnition to the ON position (do not start the truck)
5. Press and Hold the LOCK button on the key fob
6. After holding the LOCK button for four seconds also press the PANIC button within 6 seconds
7. When a single chim is heard, release both buttons.
8. Turn the ignition OFF to test the horn chirp feature
9. To reactivate this feature repeat the above steps.
10. If a chime is not heard, program mode was canceled before the feature could be disabled. If necessary, repeat the above procedure


direct from the 02 owners manual

 

Just put that in the DIY section. Thanks again Sharps!

 

DD, you owe shrp a PBR and throw one in for hydra as well!

 

no problem, at least i dont have to type it out ever again, it has been forever preserved

 

im guessing youre talkin about pabst blue ribbon?? Absolutely! thanx allot
sharp, and HS!!!!!!! :icon_beerc hug:
Me Sharp HS
LOL,

 

Shrpshtr, I live in Middletown down on the shore, but i work in Linden