99 durango rebuild
#1
![Default](https://dodgeforum.com/forum/images/icons/icon1.gif)
I would like to get any ideas about making my trans a little stronger than stock,, i do not want to have to worry about,,. Not really sure which one i have but it is a 318 truck 4 wheel drive. The pan is square with a corner cut off. The truck was bought with a bad rod , I only drove it a few miles before it let go the trans seemed ok in that short amount of time but the fluid is dark, and the truck had sat for about 5 years before i got it. should i just reseal it and a new torque converter,, is there a better converter to use,. I have the trans on my bench right now , will start taking it apart in a day or so..
Last edited by G.Gratz; 01-21-2010 at 11:39 PM.
#4
#6
![Default](https://dodgeforum.com/forum/images/icons/icon1.gif)
I know im a little late but if u havent done anything yet try out Dirtydogperformance.com Alan is a real good guy hes been in the tranny business for many years. I like to use "The Sure Cure" by Sonnex there the best in my mind it solve all the problems with the engagements and the flow problem as well
#7