When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
It's high but it's a shop, but if that includes the parts that's not too bad.
Ya that includes parts. An i went to the parts store and for the lifetime upper and lower were 100$. So 150$ now wait you think it would really take 3 hours to do them
Most shops are around 60.00 per hour so the 250 would be placing it right on par with the parts included. I didn't read all the missed posts but I do think it is best to do both sides now. It'll save you later.
Most shops are around 60.00 per hour so the 250 would be placing it right on par with the parts included. I didn't read all the missed posts but I do think it is best to do both sides now. It'll save you later.
Okay I see it is the ball joints now. Yea I would replace both sides. Would take you only about an hour or less to do it as long as you have a ball joint press to do the bottom ones This can be rented at a local parts store.