i have a 2002 durango replacing heater core i got the dash apart n looking at heater/ac box n cant figure out how to get off i took out like 20 screws n still wont come out i took two bigger ones off of top mounted to front mount... im pulling n pulling nothing it seems like im missing a screw or two... its loose but wont come out any help would b great...

 

 

Here's a video of some shop replacing a heater core. Hope this helps.
http://www.youtube.com/watch?v=_pctBv13V-o

 

thank you gonna go see what i can do i think the hard part for me is the bolts/nuts on engine side i think is whats holding me back other then that i think ima b set thanks

 

I was just going to say that you likely missed the bolt on the firewall side under the hood. Its a PITA.

IndyD

 

Thanks for the video.

Thanks Ashlee for the video, and the demonstration.....

Any chick that can rip into a front end like, well that is just plain HOT, not to mention she brings up the topic about the feel, and the mention the extension into the housing...........my 2 cents!

 

The worst one for me was the one behind the trans dipstick F&%^(NG pain in the @$$. Guess that's why I didn't put it back in.

 

my thoughts also

 

It was a nice video, But they took off parts on the dash the wasn't need too. Like the heater control head, the vents, and the bezel around the cluster. I wonder how much time they spent on the job?

 

I need to replace the heater core in my 99 dodge durango 4x4 with a/c and I need step by step instructions with pictures. if there is anyone out there that can help me out id appreciate it.