Will 33 12.50 15's fit on a stock no lift 1998 dodge durango.

Thanks Jordan

 

If you want to do some bodywork/trimming. Other than that 31/10.5/15's are max without some sort of lift.

 

Go ahead and search the t/s lift here, its cheap and will allow you to fit 33x12.50 with less trimming/rubbing. Or you can do a 3in body lift.

 

to fit 33s properly without rubbing you need the 2" t/s lift and a 3" body lift

 

33x12.5x15 stock cranked up torsions.
Torsions maxed and a lot of rubbing. Go 33x10.50 or stick with 31 or 32s. BFG has this size in M/T and A/T. The 12.5 is too wide on stock rims, with offset rims it made it worse. Frame rubbing with stock 15x8 and outside with offset. Forklift test.
5.5" Tuff Country with 33x12.5x15 No body lift.
35x12.5x15 with Glassworks fenders 5.5TC lift. No body lift.
Most tire stores will test fit the tire for you. I tested size without adjusting torsions then they let me crank away. You will rub rear flares, I cut mine flush to door. Rub em till you get a good contact patch and trim till its gone. Flare is inch from metal. Front facia is easy to clearance, rear of stock front fenders can be worked without much being in the way. Get a good test of contact and trim little by little.

 

Yeah the best bet is do the t/s with body lift.

 

I have a stock 1998 Durango 4x4 with maxed out torsion keys. Will 32x11.5x15 or 33x10.5x15 BFG MUD TERRAIN T/A KM2 tires fit with no rubbing?

 

Without trimming or a T/S lift, from what was said earlier, no.

 

With the torsions maxed out like he does 32x10.50 no rubbing, 33x10.50 with possible rubbing.

 

I love how all these people just go ball crazy on their torsion bars and run around telling everyone its the thing to do.. I would never crank past 8 full turns from stock, its like throwing money down the drain to be the badass in the mall parking lot .