Stratus Engine Parts MIA?
Legend
Joined: Apr 2006
Posts: 9,112
Likes: 1
From: Spring, TX
RE: Stratus Engine Parts MIA?
You got a '98 2.4L engine? If so, you're good. Here is some more/better info
Yes the 2.0 and 2.4 heads are the exact same head. They are the same casting number. The difference is the cam gears and the cams. You can use a 2.0 exhuast cam on your 2.4 motor and gain some HP. You must use 2.4 cam gears. Do not change the 2.4 intake cam. I will repeat the 2.0 and 2.4 heads are the same heads and can be used on either motor!!!
Thread Starter
Joined: Apr 2007
Posts: 14
Likes: 0
From:
RE: Stratus Engine Parts MIA?
Also, the underdrive pully I haqve, you said it should work but when I compared it to the stock stratus UDP, it was much smaller. It doesn't look like it will work. Will it throw off the engine balance? Thanks!
Legend
Joined: Apr 2006
Posts: 9,112
Likes: 1
From: Spring, TX
RE: Stratus Engine Parts MIA?
ORIGINAL: dirty neon r/t
Yeah I know that, but will the engine be able to hold up to the new redline at 7k?
Yeah I know that, but will the engine be able to hold up to the new redline at 7k?
ORIGINAL: dirty neon r/t
Also, the underdrive pully I have, you said it should work but when I compared it to the stock stratus UDP, it was much smaller. It doesn't look like it will work. Will it throw off the engine balance? Thanks!
Also, the underdrive pully I have, you said it should work but when I compared it to the stock stratus UDP, it was much smaller. It doesn't look like it will work. Will it throw off the engine balance? Thanks!
