i just got one of thos A/C recharge cans. and read all the instructions and did them the way it said..but when i hook it up to the car i get the reading of about 9 psi on the gauge ( thats really low) and it says to leave it on there for 5 to 15 minutes.... so i did, and the can just didnt seem like it was getting any lighter. and the gauge wasnt showing any improvement or anything. i took it back off and nothing came out. like the can was still completley full,

so has anybody got one of these things to work./ had the same problem i am having?

any feedback what be awesome

thanks

 

is your can getting cold or anything like that
try sticking a paper clip in the little valve where u screw the kit onto and relase some pressure and then try again. also lub tek a racing motor oil company makes an oil called dyno K or dyno Q either or, designed for kart racing that we use in our go karts. try pouring a very little bit of that down into there it makes it stop leaking as fast, you could probally use a similar oil as well, as long as it is very lite weight.

 

turn it upside down for a few minutes .. make sure the system is running .. and give era couple good revs while the ac is on full blast

 

nevermind got it to work now the the pierces the can was bent somehow but i bent it back and it works fine. thanks guys